CONTENTS OF PACK
- 1 X Bench Seat with attached Base Plate and Support Bracket
- 1 X Seat Adjusting Bar with attached Seat Support Clamp
- 1 X Open ended spanner
- 1 X Ring spanner
Turn the Bench Seat face down and remove the nuts from the 2 bolts in the Support Bracket.
Align holes 2 and 3 with the 2 bolts in the support bracket, making sure the Seat Support Clamp is facing upwards and overhangs the front of the Bench Seat with the round corners.
WARNING: DO NOT REMOVE THE NUT AND PIN FROM HOLE 6. THIS IS THE SEAT ANGLE SUPPORT.
Replace the two nuts on bolts 2 & 3 and tighten them using the spanners provided.